Tuffjoint Utility 'Brush-In Grout' Jointing Mortar Anthracite 12.5kg

Tuffjoint Utility 'Brush-In Grout' Jointing Mortar Anthracite 12.5kg

Features of Tuffjoint Utility 'Brush-In Grout' Jointing Mortar:

• Does not contain resin or polymers.


• Hard wearing, no mixing required.


• A hose with a fine mist spray or hand sprayer should be used to wet the mortar once brushed into the joints.


• Don't install when raining


• tuffjoint Utility can be used on damp paving but is not advisable as it will clump up and will require the joints to be topped up once the misted-on water pushes the clumps down into the joints.


• Dry paving allows the mortar to flow easier and allows unused tuffjoint Utility to be returned to the tub for future use.


• Coverage up to 31m2 (4mm Joint 1200x600x20mm Porcelain Paving)

tuffjoint Utility has been produced and tested for easy use and for high-quality, hard-wearing jointing with no mixing required.

1. Sweep in the dry mortar using a squeegee and/or a broom/brush.


2. When joints are full, remove dry excess tuffjoint Utility from the paving.


3. Apply water using a hose, and set on a fine mist spray until water pools on the surface.


4. Use a Washboy or Washboy Pro to clean the paving units.

If tuffjoint Utility is swept in dry, any excess can be returned to the tub and used at a later date, resulting in minimal wastage.