Bagged Aggregates for Building, Landscaping & Groundwork
Rose Building Supplies supplies a practical range of bagged building aggregates for concrete, mortar, paving, driveways, drainage, landscaping and general construction work.
Our current range includes ballast, sharp sand, building sand, MOT Type 1, grano dust, 10–20mm gravel and 4–10mm pea gravel, giving builders, landscapers and homeowners a choice of materials for different applications.
What Are Bagged Building Aggregates?
Bagged building aggregates are sand, stone and gravel products supplied in large bags rather than tipped loose.
They can be a useful option where site access is limited, where loose tipping is unsuitable or where you want a more controlled quantity of material for a project.
Which Bagged Aggregate Should You Choose?
The right aggregate depends on what you are building and how the material will be used.
- Ballast - a mix of sand and gravel commonly combined with cement for concrete.
- Sharp sand - a coarse sand used for screeding, paving, rendering and general building work.
- Building sand - a softer, finer sand commonly used for bricklaying mortar and pointing.
- MOT Type 1 - a compactable sub-base material for driveways, paths, patios and other groundwork.
- Grano dust - a fine compactable aggregate often used as a finishing or bedding layer in suitable paving and landscaping applications.
- 10–20mm gravel - suitable for drainage, driveways, paths and general landscaping.
- 4–10mm pea gravel - a smaller gravel used for drainage, paths, borders and decorative landscaping.
What Is Bulk Bag Ballast Used For?
Ballast is a blend of sand and gravel used primarily for making concrete when mixed with cement and water.
It is commonly used for foundations, footings, posts, bases and other general building applications where a concrete mix is required.
What Is Sharp Sand Used For?
Sharp sand has a coarse texture and is commonly used for screeding, paving, rendering, block paving and general construction work.
Its gritty structure makes it useful where a firmer, more stable sand is required than softer building sand.
What Is Building Sand Used For?
Building sand is finer and softer than sharp sand and is typically used for bricklaying mortar, pointing and general masonry work.
Our current range includes bulk bag Tattershall Building Sand for suitable mortar and general building applications.
What Is MOT Type 1 Used For?
MOT Type 1 is a crushed aggregate used to create a stable, compacted sub-base beneath driveways, patios, paths and other hard-landscaped areas.
It is generally laid and compacted in layers before the bedding layer and final surface are installed.
What Is Grano Dust Used For?
Grano dust is a fine crushed aggregate that can be compacted to form a smooth, firm layer.
It is commonly used in suitable landscaping and paving applications, including beneath artificial grass and as a fine sub-layer over a compacted base such as MOT Type 1.
What Is 10–20mm Gravel Used For?
10–20mm gravel is a versatile, free-draining aggregate used for driveways, paths, drainage areas, garden borders and general landscaping.
Because gravel is a natural quarried material, colour and appearance can vary between loads and sources.
What Is Pea Gravel Used For?
4–10mm pea gravel, sometimes referred to as pea shingle, is a smaller gravel suitable for paths, garden borders, drainage and decorative landscaping.
Its smaller particle size can make it useful where a finer gravel finish is preferred.
Bulk Bags vs Small Bags - Which Should You Choose?
Bulk bags are generally more suitable for larger projects where a greater volume of aggregate is required.
Small bags can be easier to handle and more practical for minor repairs, small jobs or locations where access is restricted.
If you only need a small quantity, browse our small bag aggregates. For larger projects, you may also want to compare our loose aggregates.
Bagged vs Loose Aggregates
Bagged and loose aggregates can contain similar materials, but the best supply method depends on site access, quantity and how the material will be handled.
Bagged aggregates are useful where cleaner storage, controlled quantities or crane offloading are preferred.
Loose aggregates can be more practical for larger quantities where suitable tipping access is available.
How Much Aggregate Do You Need?
The amount required depends on the area, finished depth and type of aggregate.
Measure the length and width of the area and decide the compacted or finished depth required. Remember that materials used as sub-base may compact after installation.
For larger or more complicated projects, contact our team with your measurements and we can help you estimate a suitable quantity.
Can Bagged Aggregates Be Used for Driveways?
Yes, depending on the product and driveway construction.
MOT Type 1 is commonly used as a compacted sub-base, while suitable gravel may be used as a finished surface or for drainage and landscaping around the driveway.
For block paving or other finished surfaces, the full build-up should be designed around the chosen paving system and site conditions.
Which Aggregate Is Best for Drainage?
Free-draining gravel can be useful for suitable drainage applications where water needs to move through the aggregate layer.
The correct size and type depend on the drainage system and intended use, so check the project specification before ordering.
Which Aggregate Is Best for Paving?
Different paving stages require different aggregates.
MOT Type 1 is commonly used beneath paved areas as a compacted sub-base, while sharp sand, grano dust or other materials may be used in suitable bedding or finishing applications depending on the paving system.
For paving projects, browse our landscaping and driveway materials ranges alongside the aggregates needed for the base.
Bagged Aggregates for Autumn & Wet-Weather Projects
Autumn is a common time for driveway repairs, drainage work, path improvements and groundwork before wetter winter conditions arrive.
Bagged MOT Type 1, gravel and sand can be useful for repair and landscaping projects where you need material delivered in manageable quantities and stored more neatly on site.
Bagged Aggregates in Peterborough & Huntingdon
Bagged building aggregates are available for collection from our Peterborough and Huntingdon branches, subject to stock availability.
Our Peterborough branch in Fengate supplies sand, ballast, MOT Type 1, gravel and other aggregates to builders, landscapers and homeowners across Peterborough and surrounding areas.
Our Huntingdon branch supplies customers across Huntingdon and nearby parts of Cambridgeshire.
Local delivery is available for many bagged aggregate products and larger project orders.
Bagged Aggregate Delivery to Corby
Rose Building Supplies also provides bagged aggregate delivery to the Corby area. Corby is a delivery-only service area and does not have an RBS branch or collection point.
Need More Than Bagged Aggregates?
For larger projects, Rose Building Supplies also supplies loose building aggregates and larger-load aggregate delivery options.
If you are unsure whether bags, loose tonnes or larger bulk deliveries are most suitable, contact our team with the project type, required material and approximate quantity.
Need Help Choosing the Right Aggregate?
If you are unsure which sand, gravel, ballast or sub-base material you require, contact our team with details of your project.
We can help you compare bagged, small-bag and loose aggregate options and work out which supply format is most practical for your site.
