C-Tec Power High Grab 'n' Bond Adhesive 230ml
Power Grab 'n' Bond is a unique solvent-free construction adhesive for heavy duty vertical applications with an exceptionally high initial grab of 100 g/cm² followed by an incredible structural bond of 22 kg/cm² when fully cured (24 hrs).
Power Grab 'n' Bond will successfully bond:
- All metals (including lead)
- Glass
- Mirrors
- All woods
- MDF
- Polystyrene
- Fibreglass
- Tiles
- Concrete
- Brick
- Most stones (without staining)
- Most synthetic materials
- Plastics (excluding PP, PE and PTFE)
Power Grab 'n' Bond is not suitable for use with materials containing:
- Polyethylene (PE)
- Polypropylene (PP).
- Polytetrafluoroethylene (PTFE)
On powder coated aluminium advice should be sought from the manufacturer of the powder coating on the suitability of their product to accept adhesives bonding to the surface layer.
Features:
- With TRIBRID® Technology Construction Adhesive for Heavy Vertical Bonding
- EC1 Plus Certified – Very Low Emissions.
- Solvent Free
- Extremely High Initial Grab for Vertical Applications without Mechanical Fixings
- Environmentally compliant.
- Solution for heavy duty bonding.
- "Asthma & Allergy Safe.
- Suitable for Clinical Environments"
- Odourless
- Can be applied in wet conditions on damp surfaces
- High Tensile Strength S
- Suitable for Cladding and Sign Installations
- Anti-Pick
Power Grab ‘n’ Bond is a solvent-free, heavy duty, high grab, high strength construction adhesive for vertical bonding. With superior TRIBRID® Technology it has unique high initial grab adhesion on virtually any material in most applications without the need for mechanical fixings.
Power Grab ‘n’ Bond bonds to most surfaces and does not attack synthetic material. Working in dry or wet conditions and coupled with the rapid curing will in most applications reduce labour time and cost by at least 50%.
Due to its unique adhesion and universal application capabilities Power Grab ‘n’ Bond is used in the construction and shopfitting sectors for large scale cladding installations are required without mechanical fixings.
With Power Grab n Bond there is absolutely no need for any additional fixings as it was initially developed for facade bonding. In addition, Power Grab n Bond has a capacity to adhere to endless materials such as stone, granite, ytong, marble, concrete, wood, MDF, fibreglass, all metals (including alloys), glass, polystyrene, mirrors and most plastics (except PP, PE and PTFE). Power Grab n Bond’s ability to bond combined materials such as wood to concrete or stainless steel to stone is incredible. As already outlined Power Grab n Bond was initially developed for façade applications, conventional methods relied on two component epoxy mix to adhere the marble or granite slab to the block wall. Depending on the weight of the slab each one would then have to be supported by drilling in ties to support each one. As with all epoxies they can be temperamental if the correct mix is not achieved. Also, full cure can be between 24 and 72 hours. Power Grab n Bond has none of these disadvantages.
