Timloc Dry Fix Verge Left Hand Unit for Profiled Roof Tiles - Terracotta
The Timloc Dry Fix Verge Left Hand Unit in Terracotta is part of Timloc's handed dry verge system for large-format interlocking concrete and clay profiled roof tiles. Designed as a robust and weather-resistant alternative to traditional mortar bedding, it provides a neat mechanical finish to the left-hand verge of compatible pitched roofs.
The system helps protect the roof edge against wind uplift, water ingress and general deterioration while providing a clean, consistent and low-maintenance appearance. This Terracotta left-hand verge unit has Timloc product code 99122.
Key Features & Benefits - Timloc Terracotta Left Hand Dry Verge
- Manufacturer: Timloc Building Products
- Product: Left Hand Dry Fix Verge Unit
- Colour: Terracotta
- Manufacturer product code: 99122
- Tile compatibility: Large-format interlocking concrete and clay profiled tiles
- Batten gauge: 260-345mm
- Roof pitch: Suitable for most pitched roofs from 15-55°
- Material: UV-protected, colour-fast polypropylene
- Suitable for verges with or without bargeboards
- Suitable for new-build and refurbishment roofing projects
- Mortar-free mechanical verge fixing system
- Helps protect against wind uplift and water ingress
- Quick, clean and straightforward installation
- Provides a neat and consistent finished roof edge
- Independently tested and compliant with BS 8612
- Helps meet BS 5534 requirements for slating and tiling
Dry Fix Verge for Profiled Roof Tiles
The Timloc Handed Dry Fix Verge system is designed specifically for use with compatible large-format interlocking concrete and clay profiled roof tiles.
Unlike traditional wet mortar verge details, the dry fix system uses mechanically fixed components to form and protect the roof edge. This removes the need for mortar and provides a reliable, consistent finish across the verge.
Left Hand Verge Unit
This product is the left-hand verge unit within Timloc's handed profiled tile system. Left and right-hand pieces are supplied separately, allowing the correct verge unit to be selected for each sloping roof edge.
For the opposite verge, use the matching Timloc Right Hand Dry Fix Verge Unit in the required colour.
Terracotta Finish
The Terracotta colour is designed to coordinate particularly well with warm red, terracotta and clay-toned roofing materials.
The verge unit is manufactured from UV-protected, colour-fast polypropylene to help maintain its appearance during long-term exterior exposure.
Suitable for 15-55° Pitched Roofs
Timloc specifies the handed profiled tile dry verge system for most pitched roof types between 15 and 55 degrees.
It can be used on verges both with and without bargeboards and is suitable for new-build roofing as well as roof refurbishment projects.
For 260-345mm Batten Gauges
The Timloc profiled tile handed verge system is designed for roof tile batten gauges between 260mm and 345mm.
Always check that the roof tile profile, batten gauge and roof construction are compatible with the Timloc system before installation.
Protection Against Weather & Deterioration
The dry verge system provides a mechanically fixed protective finish to the exposed roof edge and helps protect against wind uplift, water ingress and general deterioration.
Because the system does not rely on wet mortar bedding, it is also less affected by normal building settlement and removes the maintenance issues commonly associated with cracked or deteriorating verge mortar.
Quick Mortar-Free Installation
Timloc Dry Fix Verge provides a fast, clean and generally safer alternative to traditional mortar verge installation and can be fitted in virtually all weather conditions.
The verge units are designed to be strong while remaining sufficiently flexible to slide and fit securely around compatible profiled roof tiles.
BS 8612 Tested Dry Verge System
The Timloc Handed Dry Fix Verge system has been independently tested and complies with BS 8612 requirements for dry-fixed ridge, hip and verge systems for slating and tiling.
The system also helps meet the requirements of BS 5534 for slating and tiling when correctly specified and installed as part of a compatible roofing system.
How Many Verge Units Are Required?
Timloc specifies one verge piece for each roof tile in the sloping verge run.
The correct number required will therefore depend on the roof tile gauge and the length of the verge. An appropriate Timloc eaves closer is required at the beginning of each sloping run.
Complete Timloc Dry Verge System
This left-hand Terracotta verge unit forms part of a complete Timloc dry verge system. Matching components include:
- Right Hand Terracotta Verge Unit
- Terracotta Eaves Closer Pack
- Terracotta Angled Ridge / Apex End Cap
- Terracotta Half Round Ridge / Apex End Cap
- Optional End Grain Batten Bracket
Use compatible Timloc components throughout the verge run to achieve a complete mechanically fixed roof-edge system.
Installation Advice
Install Timloc dry verge components in accordance with the manufacturer's current fitting instructions and the roof tile manufacturer's specification.
Check roof pitch, tile type, batten gauge and verge construction before installation. The correct left or right-hand verge component must be selected for the relevant roof slope.
Why Choose Timloc Dry Fix Verge?
Timloc Dry Fix Verge provides a durable and low-maintenance alternative to traditional mortar-finished roof verges. The system combines mechanical fixing, weather protection and a consistent finished appearance with fast installation and compatibility with a wide range of large-format profiled roof tiles.
This Terracotta Left Hand Unit is ideal where a warm coloured verge finish is required and forms part of Timloc's complete handed dry fix verge system for new-build and refurbishment roofing projects.
