Joint-It So Clean 1L Masonry Patio Paving and Natural Stone Cleaner

Joint-It So Clean 1L Masonry Patio Paving and Natural Stone Cleaner 

With its powerful high-performance formula and spray-and-go formulation, spay it on your patio, driveway, or tarmac and leave it to do the job; there's no need to scrub. Please look at the product video for Joint-It So Clean, which demonstrates how easy it is to use.

Make those outside areas come to life with this natural stone and concrete cleaner, penetrating deep into the stone to remove any dirt and stains while restoring a clean patio and driveway.

Specification and Main Points:

• Ready to use formula.


• It is simple to apply to utilise a spray roller or brush.


• Stain resistant.


• It does not alter the appearance of the surface.


• Safe on natural stone.


• Suitable for use on concrete and tarmac, driveways, patios, natural stone and brick paving.


• Powerful and effective.


• Fast acting with long-lasting results.


• It also has the advantage of having a low-odour nature.

Approximate Consumption:

The manufacturer has a handy calculator that can estimate your usage.

Here's the link: Click on the Joint It So Clean tab at the top of the calculator and input your information.

How To Use:

• Before treatment, brush away any leaves, rubbish, and overgrowth.


• As with all cleaners, apply a tiny amount to a hidden area for testing.


• You can use a spray gun; if there is a breeze, use a brush or roller instead.


• If it's going to rain within four hours, don't apply.


• Use a modest pressure spray such as a pump sprayer, lance or trigger spray, roller, or brush to ensure that the surface is immaculate and saturated.


• Allow the product to complete the task on its own.


• You should notice a difference in 24 hours.


• For extremely dirty or greasy surfaces, apply the solution neat and agitate it into the surface with a brush before power washing after the water has evaporated. Reapply and allow the product to work.


• The amount of coverage depends on various factors, including the surface's porosity, sort, and texture.


• We always recommend testing a tiny concealed surface region to see how much is required and adaptable.


• The amount of product required is determined by the degree of porosity in the stone.

An Approximate General Guide:

• If you have a heavily soiled region, use one litre per 3m Square


• If you have a lightly soiled region, use one litre per 5m Square