Joint-It Dynamic 22KG Buff: Two-Part Resin Paving Grout Jointing System
Joint-It Dynamic, is a cement free – two-part resin paving joint system that has been designed for use with both permeable & non-permeable beds, to extend the longevity of paving joints in outdoor paved areas and patios.
This two-part resin system consists of two separate components which, when combined, create a chemical reaction that results in a strong, flexible, and durable paving joint. Joint-It Dynamic is designed to withstand the extremes of the British weather; rain and temperature extremes.
Made for joints of at least 5mm wide and 20mm deep, Joint-It Dynamic is ideal for natural stone, concrete & porcelain paving. Joint-It Dynamic is available in three UV stable, beautiful colours, Buff, Grey and Black. For installation, all you need is a hard and soft brush, clean water, and a paddle mixer.
Features of Joint-It Dynamic 22KG: Two-Part Resin Paving Grout Jointing System:
- Colour: Buff
- A single tub of Joint-It Dynamic will cover approx. 18m2 (will vary depending on joint size as well as paving slab size used).
- 22KG Tub, contains high quality sand, bottle of hardener & resin
- Comes in three UV stable, beautiful colours, Buff, Grey and Black
- Use with both permeable & non-permeable bedding
- Made for joints from 5mm wide and 20mm deep
- Suitable for very high traffic areas
- Manufactured with best-in-class resins & hardeners
- Exceptional durability
- Suitable for natural stone, concrete & porcelain paving
- Long lasting
- Cement-free
- Non-staining, no efflorescence
- Weed, power-washer & frost resistant
- Apply in wet or dry weather
- Low maintenance
- Unopened, Joint-It Dynamic will keep for a minimum of 12 months when stored in a cool dry place
How do I apply Joint-It Dynamic Paving Grount?
- You’ll need two brushes and a paddle mixer to apply Joint-It Dynamic. A hard bristle brush on the wet paving, to brush the product into the joints, and a soft bristle brush to finish the job. You may choose a squeegee for very smooth stone such as granite, as a squeegee often makes it easier on smoother stone patios.
- Paving joints must be a minimum of 5mm wide and 20mm deep.
- Ensure paving is firmly bedded and stable prior to filling joints and laid on a bedding material that is suitable for the intended traffic loading. Joint-It Dynamic is ideal for use on both permeable and non-permeable bases.
- Clean the paving and remove all dust and debris from the joints before applying Joint-It Dynamic.
- Remove the lid from the bucket of Joint-It Dynamic, take out both bottles – Part A and Part B and put to one side.
- When you are ready to start the application, add both bottles of liquid – Part A and Part B to the sand inside the bucket.
- Mix thoroughly with a paddle mixer for 3 minutes to completely combine the mixture.
- Add 2 litres of clean water to the bucket. You can use the bottles provided to measure and add this water. This will also ensure all resins and hardeners have been removed from liquid bottles.
- Joint-It Dynamic should now be ready to apply to your paving.
- Thoroughly soak your paving slabs with water, ensure that the paving remains soaked with water whilst you work. Never allow the paving to dry as you work with the product, keep re-wetting throughout application – you cannot over water.
- Using a brush or squeegee, immediately apply Joint-It Dynamic into the joints, additional water can be added as you work to increase and ease the flow of the product into the joints
- Ensure paving is still completely saturated with water and that all joints are completely filled to the top.
- Wait 15-30 minutes in temperatures between 3-15°C. At higher temperatures, wait 10-15 minutes.
- Using a soft brush at a 45° angle to the joints, thoroughly sweep off all of the excess product from the top of the paving. Ensure all excess sand has been removed from the top of the paving slabs. Check that all joints are filled completely to the top, if not top up!
- For a smoother finish, use a finishing bar or trowel along the joints to strike off. If you are using a trowel or similar, ensure product is still filled to the top of the joints after use. Clean tools and brushes with copious amounts of soapy water after use.
- The paving should not be walked on for approximately 24 hours after Joint-It Dynamic application. We recommend that you gently test the joints to make sure they have set before walking on the paving. Extreme high or low weather conditions will affect how long Joint-It Dynamic takes to fully harden and set
- We recommend using Joint-It Premium Seal prior to laying paving where you are using Slate, Black/Blue Limestone & Honed Black Granite. These highly porous stones benefit from being pre-sealed to prevent drawing any of the colour of Joint-It Dynamic into the stone
- Please note that Joint-It Dynamic is not suitable for V joints or bevelled slabs.
What is the Joint-It Dynamic Paving Grount: Two-Part Resin System?
The Joint-It Dynamic two-part resin system consists of two separate components that, when combined, create a chemical reaction resulting in a strong, flexible, and durable bond between the joint and paving slabs.
Joint-It Resin Binder: The binder provides adhesion and strength to the joint. It’s designed to withstand various environmental factors, including temperature fluctuations
- Joint-It Hardener: The hardener starts the curing process when mixed with the resin binder and ensures rapid setting and hardening of the paving jointing grout, ensuring that your patio is finished faster!
- Joint-It High-Quality Sand: Choose your sand colour – Buff, Grey or Black, the sand is sourced from the best quality sand on the market, colour-matched to ensure consistency and reliability.
