GTEC Standard Plasterboard 1800 x 900 x 9.5mm Square Edge
GTEC Standard Plasterboard 1800 x 900 x 9.5mm Square Edge is a general-purpose gypsum plasterboard suitable for a range of internal wall, ceiling, partition and dry-lining applications.
At 1800 x 900mm, this compact plasterboard sheet is easier to handle and manoeuvre than larger 2400 x 1200mm boards, making it a practical option for smaller rooms, refurbishment work and projects where access is restricted.
Key Features & Benefits of GTEC Standard Plasterboard 1800 x 900 x 9.5mm
- Board size: 1800 x 900mm
- Thickness: 9.5mm
- Edge: Square Edge (SE)
- General-purpose gypsum plasterboard
- Suitable for appropriate walls, ceilings, partitions and dry lining
- Compact sheet size for easier handling and installation
- Can be cut using the score-and-snap method
- Suitable for gypsum finishing plaster
- Manufactured to BS EN 520 Type A
- Reaction to fire classification: A2-s1,d0
Where Can 9.5mm Plasterboard Be Used?
GTEC Standard 9.5mm plasterboard is designed for general dry-lining applications and can be used in suitable internal wall, ceiling and partition systems.
The correct board thickness depends on the construction, framing centres and required system performance, so always check the project specification before installation.
Why Choose an 1800 x 900mm Plasterboard Sheet?
An 1800 x 900mm plasterboard sheet covers approximately 1.62m² and is smaller than a standard 2400 x 1200mm sheet.
The reduced sheet size can make it particularly convenient for renovation projects, smaller rooms, ceiling work and locations where carrying or positioning a full-size plasterboard sheet would be difficult.
Square Edge Plasterboard
This board has a square-edge profile. Square-edge plasterboard is commonly used where the surface will receive a gypsum plaster skim or other suitable finishing system.
If you intend to tape and joint the board without applying a full skim, a tapered-edge plasterboard may be more appropriate depending on the required finish.
GTEC Standard Plasterboard Technical Information
- Manufacturer / Range: GTEC / Siniat
- Board Type: Standard gypsum plasterboard
- Dimensions: 1800 x 900 x 9.5mm
- Edge Profile: Square Edge
- Standard: BS EN 520 Type A
- Reaction to Fire: Euroclass A2-s1,d0
- Nominal Weight: approximately 5.95kg/m²
- Thermal Resistance: approximately 0.050m²K/W
- Thermal Conductivity: 0.19 W/mK
- Coverage per Sheet: approximately 1.62m²
Cutting & Finishing
GTEC Standard plasterboard can be cut using the traditional score-and-snap method. Suitable drywall fixings should be selected according to whether the board is being fixed to timber or metal framing.
The board is suitable for gypsum finishing plaster and compatible jointing systems. Always follow the manufacturer's installation guidance and the specification of the complete wall or ceiling system.
Standard or Specialist Plasterboard?
This is a standard plasterboard intended for general internal applications. If your project requires enhanced moisture, acoustic, fire, vapour-control or thermal performance, browse our wider plasterboard range for specialist boards designed for those requirements.
