Ex 47x125mm Green Treated Cant Fence Rail 3.0m
Ex 47x125mm Green Treated Cant Fence Rail 3.0m is a treated timber fencing rail designed for constructing traditional closeboard and feather edge fencing. The cant profile provides a strong supporting rail for overlapping feather edge boards while its sloping shape helps rainwater run away from the timber.
Supplied in a practical 3.0m length, this green treated cant rail is suitable for new garden fencing, boundary fencing, repairs and replacement projects. Unlike traditional arris rails that may require specially shaped mortices or posts, cant rails can be fixed directly to suitable fence posts, making them a practical option for continuous runs of feather edge fencing.
Key Features & Benefits - Ex 47x125mm Green Treated Cant Fence Rail 3.0m
- Product type: Cant fence rail
- Length: 3.0m
- Ex timber size: 47x125mm
- Material: Timber
- Treatment: Green treated
- Application: Exterior fencing
- Designed for closeboard and feather edge fencing
- Supports overlapping feather edge fencing boards
- Sloping cant profile encourages rainwater run-off
- Suitable for fixing directly to appropriate timber fence posts
- Useful for new fencing, replacement rails and repair work
- 3.0m length provides a practical option for shorter fence runs and projects
Cant Rail for Feather Edge Fencing
Cant rails are commonly used as horizontal supporting rails when constructing feather edge or closeboard fencing.
Individual feather edge boards are fixed vertically to the rails with each board overlapping the next, creating a strong traditional timber fence with good privacy and wind resistance.
The cant rail provides the structural support behind the boards and helps maintain an even fence line along the complete run.
Suitable for Closeboard Fencing
This green treated timber cant rail is ideal for traditional closeboard fencing built using timber posts and individual feather edge boards.
Cant rails provide an alternative to arris rails. Their profile allows them to be fixed directly to suitable fence posts without requiring the specially shaped post recesses commonly associated with traditional arris rail construction.
Sloping Profile Helps Rainwater Run Off
The characteristic cant profile creates a sloping surface rather than a flat horizontal top.
This encourages rainwater to run away rather than remain sitting on the rail, helping reduce prolonged water retention on the timber and supporting a longer-lasting exterior fencing installation.
Green Treated Timber for Exterior Fencing
The timber is green treated to provide additional protection for outdoor fencing applications.
Green treated timber will naturally change in appearance as it is exposed to sunlight and weather. The initial green colour can fade over time and the timber may gradually weather towards a more natural grey tone.
A suitable exterior timber stain or preservative can be applied later where a particular appearance is required.
What Does Ex 47x125mm Mean?
The 47x125mm measurement refers to the original timber section from which the cant rail profile is produced.
A cant rail is shaped from this timber to create its characteristic tapered or sloping profile, so the finished rail should not be treated as a rectangular 47x125mm timber section throughout.
3.0m Cant Rail for Garden Fencing
The 3.0m length is suitable for a wide range of domestic and landscaping fencing projects and can be cut on site where shorter sections are required.
Typical applications include:
- Feather edge fencing
- Closeboard fencing
- Garden boundary fencing
- New timber fence construction
- Replacement fence rails
- Fence repairs
- Landscaping and garden projects
Cant Rail or Arris Rail?
Both cant rails and arris rails can be used to support feather edge fencing boards, but their profiles and installation methods differ.
Cant rails have a broad sloping profile and can be fixed directly to suitable posts. Traditional triangular arris rails are often installed into specially formed mortices or supported using appropriate brackets.
The correct rail should be selected according to the fence design, existing posts and preferred construction method.
Building a Feather Edge Fence
A typical closeboard or feather edge fence is constructed using suitable fence posts, horizontal supporting rails and overlapping vertical feather edge boards.
A gravel board can also be installed along the bottom of the fence to help separate the feather edge boards from direct ground contact.
Use suitable exterior-grade fixings for the timber and make sure all posts, rails and boards are installed securely for the height and design of the fence.
Cutting Treated Cant Rail
The 3.0m cant rail can be cut to the required length using suitable woodworking tools.
Where treated timber is cut, drilled or otherwise machined, any newly exposed untreated surfaces should be protected with a suitable end-grain or timber preservative treatment in accordance with the timber supplier's recommendations.
Natural Timber Characteristics
Timber is a natural material and variations in colour, grain, knots and surface appearance are normal.
Changes such as minor splits, checking or movement can also occur as external timber responds to changing moisture levels and weather conditions. These are natural characteristics of exterior timber rather than necessarily indicating a product fault.
Why Choose Ex 47x125mm Green Treated Cant Fence Rail 3.0m?
Ex 47x125mm Green Treated Cant Fence Rail 3.0m provides a practical supporting rail for traditional closeboard and feather edge fencing. Its sloping profile helps shed rainwater, while the green treated timber is suitable for exterior fencing projects.
The 3.0m length is a useful choice for new garden fences, boundary fencing, repairs and replacement work and can be combined with treated fence posts, feather edge boards and gravel boards to create a complete timber fencing system.
