25x50 Treated Garden Timber Screening Batten UC3 - 3.6m ( Finish Size 20x44mm )
The BSW Treated Timber Screening Batten 25 x 50mm x 3.6m is designed for creating contemporary slatted fencing, garden privacy screens and decorative outdoor timber features.
Commonly referred to in the trade as a 2x1 treated timber batten, this screening batten has a nominal section of 25 x 50mm and an approximate finished size of 20 x 44mm after planing.
The timber has a smooth planed finish with eased edges, helping to create a neat, modern appearance while allowing rainwater to run away from the surface more easily.
Green pressure treated to Use Class 3, the batten is suitable for appropriate exterior, above-ground applications. Its 3.6m length makes it practical for fencing, screening and landscaping projects while helping reduce unnecessary joins.
Key Features & Benefits of Garden Timber Screening Batten:
- BSW treated timber screening batten
- Ideal for modern slatted fencing and garden privacy screens
- Suitable for decorative landscaping and outdoor timber projects
- Nominal size: 25 x 50mm
- Commonly known as a 2x1 timber batten
- Approximate finished size: 20 x 44mm
- Length: 3.6m
- Smooth planed surface for a neat finished appearance
- Eased edges help water run away from the timber
- Green pressure treated to UC3
- Suitable for exterior, above-ground applications
- Can be installed horizontally or vertically
- Can accept a suitable exterior paint or stain
- PEFC-certified timber from responsibly managed sources
Product Specifications of Screening Batten:
- Manufacturer: BSW Timber
- Product Type: Timber Screening and Landscape Batten
- Material: Treated Softwood
- Nominal Size: 25 x 50mm (2x1)
- Approximate Finished Size: 20 x 44mm
- Length: 3.6m
- Finish: Planed with eased edges
- Treatment: Green pressure treated
- Use Class: UC3
- Certification: PEFC
- Application: Exterior, above-ground fencing and screening
- Selling Unit: Each
What Are Timber Screening Battens Used For?
Timber screening battens are narrow lengths of treated timber used to create slatted fencing, privacy screens and decorative garden features. They can be installed horizontally or vertically depending on the required appearance.
Typical uses include:
- Horizontal slatted garden fencing
- Vertical timber privacy screens
- Patio and seating-area screening
- Garden dividers and decorative screens
- Bin and utility-area screening
- Pergola and landscaping features
- Refreshing suitable existing fence panels
- General exterior timber projects
Create Contemporary Slatted Fencing
These slatted fence battens are suitable for creating a modern timber boundary or privacy screen. The spacing between each batten can be adjusted depending on the required level of privacy, airflow and visibility.
A suitable spacer can be used during installation to maintain even gaps between each timber slat. The battens should be fixed to a secure supporting frame using appropriate exterior-grade screws or nails.
Suitable for New and Existing Fencing
The battens can be used to construct a new slatted screen or fitted over a suitable, structurally sound existing fence or timber framework to create a cleaner, contemporary appearance.
Before adding battens to an existing fence, check that the fence posts, rails and panels are secure and capable of supporting the additional timber and wind load.
Planed 2x1 Timber Batten
The nominal section is 25 x 50mm, a size commonly referred to in the trade as a 2x1 timber batten.
After planing and finishing, the approximate actual dimensions are 20 x 44mm. Minor dimensional variation may occur because timber is a natural material.
Smooth Finish with Eased Edges
The screening batten has a smoother finish than ordinary rough-sawn fencing timber, helping to create a neat and refined appearance.
Its eased edges soften the corners, improve handling and help rainwater run away from the timber rather than remaining on sharp edges.
UC3 Green Pressure-Treated Timber
This timber screening batten is green pressure treated to Use Class 3 for suitable exterior applications above ground. The treatment helps protect the timber against fungal decay and wood-destroying insects.
UC3 treated timber is not intended for permanent direct contact with the ground. Timber installed in ground-contact applications should have the appropriate treatment classification for that use.
Can the Battens Be Painted or Stained?
Yes. Once the treated timber is sufficiently dry, it can be coated with a suitable exterior timber paint or stain.
Follow the coating manufacturer's preparation and application instructions. Any freshly cut ends or drilled areas should be treated with an appropriate end-grain preservative before installation.
Natural Timber Appearance
As this product is made from natural softwood, variations in grain, knots, shade and surface appearance should be expected.
Freshly treated timber may have a stronger green colour when new. Its appearance will gradually change as it is exposed to outdoor conditions. Product photographs should therefore be treated as a guide.
How Many Screening Battens Will I Need?
The number of battens required will depend on the total size of the screen, whether the battens are installed horizontally or vertically and the size of the gap between each timber slat.
Measure the complete screening area and decide on the spacing before ordering. Allow an additional quantity for cuts, damaged sections and adjustments around posts, corners or gates.
Buy Timber Screening Battens from Rose Building Supplies
Order BSW Treated Timber Screening Battens 25 x 50mm x 3.6m online from Rose Building Supplies for slatted fencing, garden privacy screens and landscaping projects.
Check current availability for collection from our Peterborough and Huntingdon branches, with local delivery available across Peterborough, Huntingdon, Corby and selected surrounding areas.
Browse our full range of fencing supplies for fence posts, rails, panels, gates, screws, wood treatments and other materials required to complete your screening project.
Frequently Asked Questions
What size is the BSW screening batten?
The nominal section is 25 x 50mm, commonly referred to as 2x1. The approximate finished size is 20 x 44mm, and each batten is 3.6m long.
Can these battens be used for slatted fencing?
Yes. They are suitable for contemporary slatted fencing, privacy screens and other decorative outdoor timber projects.
Can screening battens be installed horizontally or vertically?
Yes. The battens can be installed horizontally or vertically on a suitable supporting framework, depending on the required design.
What does UC3 treated timber mean?
UC3 treatment is intended for suitable exterior timber applications above ground. It helps protect the timber against fungal decay and insect attack.
Is this suitable for direct ground contact?
No. UC3 treated timber is intended for exterior use above ground. Timber used in direct ground contact should have the appropriate treatment classification.
Is this a roofing batten?
No. This is a planed screening and landscape batten intended for fencing, privacy screens and decorative exterior projects. Roofing applications require correctly graded roofing battens.
Can these battens be attached to an existing fence?
They can be fitted to a suitable secure fence or timber framework, provided the existing structure is sound and capable of supporting the additional timber and wind load.
Can the timber be painted or stained?
Yes. Once sufficiently dry, the timber can be finished with a suitable exterior paint or stain.
Do Rose Building Supplies deliver screening battens?
Local delivery is available across Peterborough, Huntingdon, Corby and selected surrounding locations. Delivery availability and minimum order requirements depend on the postcode and total order.
