Restec Roofing Systems are a UK manufacturer of high-performance liquid roofing and GRP flat roofing systems, designed for trade, roofing contractors and building merchants.
Their range includes durable waterproofing solutions for flat roofs, balconies and complex roof areas, including FLEXITEC and GRPROOF systems. Restec products are manufactured in the UK and developed with a strong focus on quality, long-term performance and practical application on site.
Restec also places a clear focus on sustainability, including efficient UK manufacturing, environmental management standards and reducing waste within the roofing industry. You can read more about their environmental approach here: Restec Sustainability and the Environment
Restec Flexitec Acetone (1ltr) is intended for use in roofing applications, especially where GRP systems are installed. It serves as a reliable solvent for cleaning tools, rollers, and surfaces to remove uncured resin, grease, and other contaminants during installation work. Acetone can also be used to decontaminate surfaces in between coats or for reactivating aged substrates before coating with Flexitec 2020 (where recommend in the Application Manual)
Restec Flexitec GRP Roof Resin Dark Grey 10kg is a flexible, pre-accelerated polyester resin used to create the waterproof membrane in Restec liquid roofing systems. This 10kg dark grey resin combines the strength of fibreglass with the flexibility of liquid coatings. When used with Flexitec primer, powder hardener and 225g/m² CSM matting, it forms a seamless roofing membrane with a life expectancy of up to 20 years.
Restec Flexitec Resin Summer Inhibitor (105g) is used during warmer summer conditions to help slow down the curing time of Flexitec 2020 Resin. It can be added to the resin on site before use, where temperature conditions require it. This product is not a replacement for powder hardener. Powder hardener must still be added at a minimum rate of 2% before application.
Restec Flexitec Roofing Kit (10m2) GRP Fibreglass is a flexible, single-resin liquid roofing system that combines the strength of fibreglass with the crack-bridging flexibility of liquid coatings. Unlike traditional GRP systems, it uses a hybrid polyester resin that cures quickly, even at low temperatures. It can also be applied over many existing roof surfaces, including felt, asphalt, concrete, GRP, PVC single-ply and OSB3.
Restec GRP Fibreglass Taping Mat (75mm x 18m) is a fibreglass bandage designed for reinforcing joints and details in the GRP roofing system. It dissolves during resin application to create a seamless, reinforced finish.
Restec GRP Finishing Tissue (150mm x 25m) is glass fibre finishing tissue for forming neat finishes on trim corners and tidying up details on roofs, such as pipes, rooflights or outlets. This pack contains 25 lm of 150mm glassfibre tissue.
Restec GRP Mixing Bucket [Printed & Calibrated] 10ltr - a fully printed calibrated bucket for making mixes up to 10 litres. Suitable for all Restec liquid and GRP products. Designed to help with accurate mixing of Flexitec primer, resin and hardener.
Restec ResKit All-in-One Emergency Roof Repair Kit designed for fast, durable and waterproof repairs. Suitable for leaks, cracks, storm damage and general flat roof maintenance, it provides a tough, flexible finish with no primer required.
Restec ResKit Felt Finish Slate Granules 1kg allows you to blend the repair to an existing felt roof, offering seamless repairs Engineered to withstand extreme weather conditions, RESKIT delivers professional-grade results with reliable performance.
Restec ResTrims A170 GRP Drip Trim 65mm (3m) is installed to any perimeter edge where water runs off into a gutter. GRP edge trims must be installed at all roof perimeters including exposed edges, wall abutments and at joints to adjacent pitched roofs.
Restec ResTrims A200 GRP Drip Trim 85mm (3m) is a purpose-designed fibreglass (GRP) edge trim which is installed to any perimeter edge where water runs off into a gutter. GRP edge trims must be installed at all roof perimeters including exposed edges, wall abutments and at joints to adjacent pitched roofs.
Restec ResTrims B230 GRP Upstand Fascia Raised Edge Trim 100mm (3m) is Installed to perimeter edges where water does not run off. Compatible with the A170 Drip Trim 65mm.
Restec ResTrims B260 GRP Upstand Fascia Raised Edge Trim 120mm (3m) is Installed to perimeter edges where water does not run off. Compatible with the A170 Drip Trim 65mm.
Restec ResTrims C1 GRP Universal External Corner is pre-formed fibreglass (GRP) corner units designed to create strong, watertight and professional external corner details within Restec fibreglass roofing systems. Installed at external corners of the roof in the junction between an upstand fascia and drip trim.